Why is there new scale?[ 07-18 11:46 ]

The project has a debugging period, and there may be changes in water sources and other factors on-site in the later stage, which require further debugging. During this stage, a small amount of hard crystals are allowed to occur, which can be removed in the later stage. During the debugging period, we need to determine whether the various parameters of the water treatment equipment match. We will monitor them in real-time, and during this process, we also need to communicate with the client promptly, such as when there are some modifications on-site or when there are changes in pipelines, switching water pumps and sources. Please inform us promptly through the workgroup. The effect of scale removal and prevention can only be achieved when the signal of the device matches the water quality characteristics.

Is there any problem running together with scale inhibitors?[ 07-10 09:50 ]

The equipment can operate together with the scale inhibitor, and the two will not affect each other (under the action of equipment signals, the scale inhibitor is basically ineffective, whether it can be said to be determined by the business).

How to verify the operational effectiveness?[ 07-06 15:33 ]

Firstly, visually inspect and open the heat exchanger for observation. The second one is based on water quality testing data. The third operating temperature and pressure data. The fourth one is hanging, to determine the condition of the crystal on the surface of the hanging. In reverse osmosis, it depends on the operating pressure and desalination rate.